Discover the composition, characteristics, properties and applications of our vast product range. Righton Blackburns' datasheets: designed to give customers confidence.

Data Sheets

Stainless Steel - Duplex

1.4501/ F55 Super Duplex


Duplex and Superduplex UNS S32760 (F55) give significant life cycle cost advantages when used in severe and corrosive conditions. Superduplex is available in bar, sheet, plate, tube, pipe and fittings.

Both materials have exceptional resistance to pitting, crevice corrosion and to stress corrosion cracking and have high strength combined weldability. Duplex and Superduplex can be used for many applications including propeller shafts, seawater oil and gas piping systems on offshore platforms, seawater piping systems in desalination plants, subsea manifolds and flowlines, subsea pipeline systems, topside process systems, subsea umbilicals and submerged components.

Chemical Composition

UNS S32760
1.4501 Steel
Chemical Element % Present
Carbon (C) 0.0 - 0.03
Chromium (Cr) 24.00 - 26.00
Manganese (Mn) 0.0 - 1.00
Silicon (Si) 0.0 - 1.00
Phosphorous (P) 0.0 - 0.03
Sulphur (S) 0.0 - 0.01
Nickel (Ni) 6.00 - 8.00
Nitrogen (N) 0.20 - 0.30
Copper (Cu) 0.50 - 1.00
Molybdenum (Mo) 3.00 - 4.00
Tungsten (W) 0.50 - 1.00
Iron (Fe) Balance

Alloy Designations

ASTM A479

ASTM A276

NACE MR0175 ISO 15156

NORSOK M630

1.4501

F55

Generic Physical Properties

Physical Property Value
Density 7.81 g/cm³
Thermal Expansion 17.2 x10^-6 /K
Thermal Conductivity 14.2 W/m.K
Electrical Resistivity 0.8 x10^-6 Ω .m

Mechanical Properties

EN 10088-3:2005
Bar & Section - Up to 160mm Dia / Thickness
Mechanical Property Value
Elongation A50 mm 25 %
Hardness Brinell 270 Max HB
Tensile Strength 750 N/mm2
0.2% Proof Stress 550 N/mm2

 


Disclaimer

This Data is indicative only and as such is not to be relied upon in place of the full specification. In particular, mechanical property requirements vary widely with temper, product and product dimensions. All information is based on our present knowledge and is given in good faith. No liability will be accepted by the Company in respect of any action taken by any third party in reliance thereon.

Please note that the 'Datasheet Update' date shown above is no guarantee of accuracy or whether the datasheet is up to date.

The information provided in this datasheet has been drawn from various recognised sources, including EN Standards, recognised industry references (printed & online) and manufacturers’ data. No guarantee is given that the information is from the latest issue of those sources or about the accuracy of those sources.

Material supplied by the Company may vary significantly from this data, but will conform to all relevant and applicable standards.

As the products detailed may be used for a wide variety of purposes and as the Company has no control over their use; the Company specifically excludes all conditions or warranties expressed or implied by statute or otherwise as to dimensions, properties and/or fitness for any particular purpose, whether expressed or implied.

Advice given by the Company to any third party is given for that party’s assistance only and without liability on the part of the Company. All transactions are subject to the Company’s current Conditions of Sale. The extent of the Company’s liabilities to any customer is clearly set out in those Conditions; a copy of which is available on request.

Registered Office

Please note this is a non trading address

Parkway House
Unit 6 Parkway Industrial Estate
Pacific Avenue
Wednesbury
West Midlands
WS10 7WP

Registered in England & Wales.
Company No. 00143411
VAT No. 711115591

Legal & Information

Orders & Payments

For more details on orders & payments to Righton & Blackburns Limited, please select a Service Centre from the map opposite. Specific details are available for each Service Centre.


Site by FDG Creative Ltd