3003 O Sheet Grade - Aluminium - Righton Blackburns

Range Enquiry

To enquire about our range or your specific requirements, please contact your local service centre.

Related Specifications

Aluminium alloy 3003 also corresponds to the following standard designations and specifications:

ISO Al Mn1

Temper Types

The most common tempers for 3003 aluminium are:

Properties

Chemical Composition

Chemical Element	% Present
Others (Total)	0.00 - 0.15
Cobalt (Co)	0.05 - 0.20
Hydrogen (H)	0.00 - 0.70
Magnesium (Mg)	1.00 - 1.50
Silicon + Iron (Si+Fe)	0.00 - 0.60
Zirconium (Zr)	0.00 - 0.10
Other (Each)	0.00 - 0.05
Aluminium (Al)	Balance

Mechanical Property	Value
Tensile Strength	95 - 135 MPa
Proof Stress	35 Min MPa
Hardness Brinell	28 HB

General Physical Properties

Physical Property	Value
Density	2.73 g/cm³
Melting Point	655 °C
Thermal Expansion	23.1 x 10^-6/K
Modulus of Elasticity	69.5 GPa
Thermal Conductivity	190 W/m.K
Electrical Resistivity	0.034 x 10^-6 Ω .m

Applications

Building industry: roofing and sidings, acoustic ceilings, corrugated sheets
Chemical and food industries: storage tanks, pipes, metal work
Equipment for heating and cooling: heat exchangers, air condition evaporators, motor vehicle radiators, freezer linings
Home appliances: cooking utensils, bakery moulds
Office equipment
Tube & Pipe
Packaging: containers, closures
Cladding alloy

Characteristics

Moderate strength
Cold working can increase the strength of this alloy
High ductility
Excellent corrosion resistance

Additional Information

Fabrication

Process	Rating
Workability - Cold	Very Good
Machinability	Acceptable
Weldability - Gas	Very Good
Weldability - Arc	Very Good
Weldability - Resistance	Good
Brazability	Very Good
Solderability	Very Good

Sheet Size	Thicknesses
2500 x 1250	1.5mm - 3.0mm

Find your local Service Centre

Experienced multi-product specialists
In-house state of the art processing facilities
Large fleet of bespoke delivery vehicles

Disclaimer

This Data is indicative only and as such is not to be relied upon in place of the full specification. In particular, mechanical property requirements vary widely with temper, product and product dimensions. All information is based on our present knowledge and is given in good faith. No liability will be accepted by the Company in respect of any action taken by any third party in reliance thereon. Please note that the 'Datasheet Update' date shown above is no guarantee of accuracy or whether the datasheet is up to date.

The information provided in this datasheet has been drawn from various recognised sources, including EN Standards, recognised industry references (printed S online) and manufacturers' data. No guarantee is given that the information is from the latest issue of those sources or about the accuracy of those sources. Material supplied by the Company may vary significantly from this data but will conform to all relevant and applicable standards. As the products detailed may be used for a wide variety of purposes and as the Company has no control over their use; the Company specifically excludes all conditions or warranties expressed or implied by statute or otherwise as to dimensions, properties and/or fitness for any particular purpose, whether expressed or implied. Advice given by the Company to any third party is given for that party's assistance only and without liability on the part of the Company. All transactions are subject to the Company's current Conditions of Sale. The extent of the Company's liabilities to any customer is clearly set out in those Conditions; a copy of which is available on request.

Aluminium, Commercial Alloy3003 O Sheet

A general purpose alloy with moderate strength in the soft O condition.

Range Enquiry

Related Specifications

Temper Types

Properties

Alloy 3003

BS EN 573-3

Sheet 0.2mm to 6.00mm

BS EN 485-2

Applications

Characteristics

Additional Information

Find your local Service Centre